| Wincher for Toyota FJ Cruiser (page down for MultiCarrier) |
Specifications:
The main Wincher bumper is constructed with 1/4" winch mount
and mounting brackets, the remainder of the bumper being formed
from 3/16" thick steel. Optional grill guard and light guards are
formed from DOM tubing for light weight and strength.
The winch box will accept up to a 16,500 pound capacity winch.
Both integrated and non-integrated solenoid winches will fit.
Build it as you like it options allow the bumper to be personalized to
your truck.
The lower profile than factory bumper offers improved ground
clearance and approach angle while providing superior strength
and protection. Larger wheel well openings allow for larger tires
without additional trimming to the bumper
Available in satin black, gloss black, or aluminum/silver - brite.
Primer finish allows do it yourself colours and optional Scorpion
spray on bed liner finish offers a more durable than paint finish that
is also corrosion resistant.
The main Wincher bumper is constructed with 1/4" winch mount
and mounting brackets, the remainder of the bumper being formed
from 3/16" thick steel. Optional grill guard and light guards are
formed from DOM tubing for light weight and strength.
The winch box will accept up to a 16,500 pound capacity winch.
Both integrated and non-integrated solenoid winches will fit.
Build it as you like it options allow the bumper to be personalized to
your truck.
The lower profile than factory bumper offers improved ground
clearance and approach angle while providing superior strength
and protection. Larger wheel well openings allow for larger tires
without additional trimming to the bumper
Available in satin black, gloss black, or aluminum/silver - brite.
Primer finish allows do it yourself colours and optional Scorpion
spray on bed liner finish offers a more durable than paint finish that
is also corrosion resistant.
Pricing:
Base model bumper in satin black finish - $500
Available as winch bumper, receiver bumper or bumper only
Options:
Grill Guard - $85
Light Guards - $85
Intermediate grill guard bar with light tabs - $65
D rings or shackle mounts - $40 pair
Receiver tube in addition to winch mount - $60
Recessed Hella 90mm projector fog lights - $150 pair
Recessed 4" PIAA Ion 510 lights - $245 pair
Recessed 5" ProComp 55 lights - $115 pair
Rubber Dock Bumpers - $40 set
Colours:
Satin Black - Standard
Bare Metal - ($20)
Gloss Black - $25
Aluminum/Silver-Brite - $40
Scorpion spray on bed liner finish - $100
Base model bumper in satin black finish - $500
Available as winch bumper, receiver bumper or bumper only
Options:
Grill Guard - $85
Light Guards - $85
Intermediate grill guard bar with light tabs - $65
D rings or shackle mounts - $40 pair
Receiver tube in addition to winch mount - $60
Recessed Hella 90mm projector fog lights - $150 pair
Recessed 4" PIAA Ion 510 lights - $245 pair
Recessed 5" ProComp 55 lights - $115 pair
Rubber Dock Bumpers - $40 set
Colours:
Satin Black - Standard
Bare Metal - ($20)
Gloss Black - $25
Aluminum/Silver-Brite - $40
Scorpion spray on bed liner finish - $100
| MultiCarrier for FJ Cruiser |
This close up view shows the optional stainless steel fold
down step (upper right), jerry can holder, and license plate
remount kit.
Concealed by the tire carrier arm is the non-skid diamond
plate step.
down step (upper right), jerry can holder, and license plate
remount kit.
Concealed by the tire carrier arm is the non-skid diamond
plate step.
Available as a replacement rear bumper only or as a bumper with
swing away tire carrier, the MultiCarrier replaces the molded plastic
factory bumper. Also replaced is the factory receiver hitch and about
2" in ground clearance is gained. Provisions are available to
remount backup sensors, no extra charge, please specify when
ordering
The bumper is formed from 3/16" steel. 1/4" mounting brackets and
1.5" DOM braces secure it to the frame. Some assembly is required
during installation.
swing away tire carrier, the MultiCarrier replaces the molded plastic
factory bumper. Also replaced is the factory receiver hitch and about
2" in ground clearance is gained. Provisions are available to
remount backup sensors, no extra charge, please specify when
ordering
The bumper is formed from 3/16" steel. 1/4" mounting brackets and
1.5" DOM braces secure it to the frame. Some assembly is required
during installation.
Pricing:
Bumper only (includes all installation hardware, receiver hitch,
shackle mounts, in a satin black finish) - $600
MultiCarrier system (includes everything above plus swing away
tire carrier) - $875 (Please specify wheel backspacing when
ordering)
Options:
Jack carrier - $25 (not available with jerry can holder option)
Jerry can holder - $45 (not available with jack carrier option)
License plate light and mount - $25 (not required unless getting
either the jack carrier or jerry can holder)
Stainless steel fold down steps (one each side) - $75
Optional Finishes:
Bare Metal ($20)
Gloss black - $25
Aluminum/Silver-Brite - $40
Spray on Truck Bed lining - $100
Bumper only (includes all installation hardware, receiver hitch,
shackle mounts, in a satin black finish) - $600
MultiCarrier system (includes everything above plus swing away
tire carrier) - $875 (Please specify wheel backspacing when
ordering)
Options:
Jack carrier - $25 (not available with jerry can holder option)
Jerry can holder - $45 (not available with jack carrier option)
License plate light and mount - $25 (not required unless getting
either the jack carrier or jerry can holder)
Stainless steel fold down steps (one each side) - $75
Optional Finishes:
Bare Metal ($20)
Gloss black - $25
Aluminum/Silver-Brite - $40
Spray on Truck Bed lining - $100