| Projects and Equipment for the Jeep JK Wrangler, Rubicon, & Unlimited |
Specifications:
The Wincher is formed from 3/16" (36,000 psi) steel with 1/4"
mounting brackets. It bolts directly to the frame using eight grade
8, 1/2" diameter bolts (included). If you need an even heavier duty
bumper, the bumper can be ordered in all 1/4" steel.
Factory fog light holes are standard, but the Wincher can also be
upgraded to utilize PIAA 510 series fog or driving lights.
Standard finish is a low gloss satin black. Also available in gloss
black, aluminum/silver-brite, custom colours, primer only, bare
metal, and coated with spray on truck bed liner (shown here).
A one piece skid plate (shown below) bolts to the bottom of the
bumper and the vehicle cross member to protect the automatic
sway bar disconnect mechanism.
The Wincher is formed from 3/16" (36,000 psi) steel with 1/4"
mounting brackets. It bolts directly to the frame using eight grade
8, 1/2" diameter bolts (included). If you need an even heavier duty
bumper, the bumper can be ordered in all 1/4" steel.
Factory fog light holes are standard, but the Wincher can also be
upgraded to utilize PIAA 510 series fog or driving lights.
Standard finish is a low gloss satin black. Also available in gloss
black, aluminum/silver-brite, custom colours, primer only, bare
metal, and coated with spray on truck bed liner (shown here).
A one piece skid plate (shown below) bolts to the bottom of the
bumper and the vehicle cross member to protect the automatic
sway bar disconnect mechanism.
Pricing, Wincher, Jeep JK
Base model bumper (light holes, skid plate) - $550
Options:
All 1/4" construction - $50
Mid grill light bar - $75
Shackle mounts or D rings - $40 pair
PIAA 510 light kit & mount - $190
Finishes:
satin black - std.
primer only - NC
Bare metal - ($20)
Gloss black - $20
Aluminum/Silver-Brite - $45
Spray on bed liner in a standard colour - $100
Custom colours - please contact the office.
Base model bumper (light holes, skid plate) - $550
Options:
All 1/4" construction - $50
Mid grill light bar - $75
Shackle mounts or D rings - $40 pair
PIAA 510 light kit & mount - $190
Finishes:
satin black - std.
primer only - NC
Bare metal - ($20)
Gloss black - $20
Aluminum/Silver-Brite - $45
Spray on bed liner in a standard colour - $100
Custom colours - please contact the office.
Specifications:
The MultiCarrier is formed from 3/16" (36,000 psi) steel with
1/4" mounting brackets. It bolts directly to the frame using a
combination of factory mounting points and our own for a total
of 12 mounting bolts. If you need an even heavier duty
bumper, the bumper can be ordered in all 1/4" steel.
Order with gas can carrier and an adjustable depth tire carrier
stem is included.
Standard finish is a low gloss satin black. Also available in
gloss black, aluminum/silver-brite, custom colours, primer
only, bare metal, and coated with spray on truck bed liner
(shown here).
The MultiCarrier bumper is designed to fit over the factory
receiver hitch, but can also be ordered with its own integral
hitch.
The MultiCarrier is formed from 3/16" (36,000 psi) steel with
1/4" mounting brackets. It bolts directly to the frame using a
combination of factory mounting points and our own for a total
of 12 mounting bolts. If you need an even heavier duty
bumper, the bumper can be ordered in all 1/4" steel.
Order with gas can carrier and an adjustable depth tire carrier
stem is included.
Standard finish is a low gloss satin black. Also available in
gloss black, aluminum/silver-brite, custom colours, primer
only, bare metal, and coated with spray on truck bed liner
(shown here).
The MultiCarrier bumper is designed to fit over the factory
receiver hitch, but can also be ordered with its own integral
hitch.
Pricing, MultiCarrier, JK:
Base model bumper only - $395
MultiCarrier System (bumper, tire carrier) - $590
Options:
1st gas can carrier - $65
2nd gas can carrier - $45
LED backup lights - $75
Mounting hole for 7 prong trailer plug - $15
Receiver hitch - $65
Finishes:
satin black - std.
primer only - NC
Bare metal - ($20)
Gloss black - $20
Aluminum/Silver-Brite - $45
Spray on bed liner in a standard colour - $100
Custom colours - please contact the office.
Base model bumper only - $395
MultiCarrier System (bumper, tire carrier) - $590
Options:
1st gas can carrier - $65
2nd gas can carrier - $45
LED backup lights - $75
Mounting hole for 7 prong trailer plug - $15
Receiver hitch - $65
Finishes:
satin black - std.
primer only - NC
Bare metal - ($20)
Gloss black - $20
Aluminum/Silver-Brite - $45
Spray on bed liner in a standard colour - $100
Custom colours - please contact the office.