| Wincher for 2005 - 2008 Nissan Frontier & Pathfinder 2005 - 2007 |
| see below for PostRunner, prerunner, and Multicarrier |
Pricing, Wincher, Frontier:
Base model winch bumper or receiver style - $520
As a bumper only - $500
Options:
Grill Guard - $85
Light Guards - $85
Shackle Mounts or D rings - $40 pair
Receiver (with conventional winch style) - $60
Recessed 5" 55 watt offroad lights - $115
Recessed 5" 100 watt offroad lights - $150
Light bar (not shown) - $45
Finishes:
Standard finish is satin black, optional gloss black $25
or aluminum/silver-brite $40. Coat with spray on
bedliner material, $100 additional.
Other options:
3/16" aluminum replacement front skid plate - $175
Base model winch bumper or receiver style - $520
As a bumper only - $500
Options:
Grill Guard - $85
Light Guards - $85
Shackle Mounts or D rings - $40 pair
Receiver (with conventional winch style) - $60
Recessed 5" 55 watt offroad lights - $115
Recessed 5" 100 watt offroad lights - $150
Light bar (not shown) - $45
Finishes:
Standard finish is satin black, optional gloss black $25
or aluminum/silver-brite $40. Coat with spray on
bedliner material, $100 additional.
Other options:
3/16" aluminum replacement front skid plate - $175
| Fitting the Wincher to the Pathfinder ---> |
The Pathfinder and the Frontier have the same front
end with the exception of the bumper. The
Pathfinder bumper is one piece while the Frontier
has a separate chin piece and bumper. Depending
on your level of comfort, you can either cut the
Pathfinder bumper, leaving only the chin portion or
else remove the bumper entirely and purchase the
Frontier chin piece.
end with the exception of the bumper. The
Pathfinder bumper is one piece while the Frontier
has a separate chin piece and bumper. Depending
on your level of comfort, you can either cut the
Pathfinder bumper, leaving only the chin portion or
else remove the bumper entirely and purchase the
Frontier chin piece.
This pictures shows the optional light bar (just
below the Nissan emblem on the grill) and a
custom addition to the grill guard, adding a bar in
each section in line with the body moulding. Add
$75 for this addition.
This truck is also equipped with our home made
suspension lift, basically a 1/2" spacer on the front
end only to level the truck after the addition of the
winch and bumper.
below the Nissan emblem on the grill) and a
custom addition to the grill guard, adding a bar in
each section in line with the body moulding. Add
$75 for this addition.
This truck is also equipped with our home made
suspension lift, basically a 1/2" spacer on the front
end only to level the truck after the addition of the
winch and bumper.
| Frontier PostRunner |
$475 for the PostRunner includes shackle
mounts, receiver tube, and light mounts.
Optional bedliner finish shown here is $65
additional.
mounts, receiver tube, and light mounts.
Optional bedliner finish shown here is $65
additional.
| Frontier PreRunner |
$550 for the PreRunner style bumper.
Includes receiver tube, shackle moutns, and
light mounts. Greatly improves departure
angle. Immensely strong but less that 100 lb.
Optional bedliner finish shown is $65
additional.
Includes receiver tube, shackle moutns, and
light mounts. Greatly improves departure
angle. Immensely strong but less that 100 lb.
Optional bedliner finish shown is $65
additional.
| Frontier Multicarrier |
Pricing, Frontier:
Multicarrier bumper only - $300
Multicarrier system (bumper & tire carrier) - $570
Options:
Receiver hitch (2" ID) with chain hooks - $65
Jack carrier - $25
CB antenna mount - $10
Gas can carrier - $45
Recessed LED stop/turn/tail lights - $115 pair
Recessed LED backup lights - $75 pair
Specifications:
Main bumper is made from 6" x 6" x 3/16" wall tube.
Standard finish is satin black. $25 gloss black, $40
aluminum/silver-brite. Scorpion spray on truck bed liner
finish available, $100 additional. "D" rings or shackle
mounts are standard. License plate recess with lights is
standard.
Multicarrier bumper only - $300
Multicarrier system (bumper & tire carrier) - $570
Options:
Receiver hitch (2" ID) with chain hooks - $65
Jack carrier - $25
CB antenna mount - $10
Gas can carrier - $45
Recessed LED stop/turn/tail lights - $115 pair
Recessed LED backup lights - $75 pair
Specifications:
Main bumper is made from 6" x 6" x 3/16" wall tube.
Standard finish is satin black. $25 gloss black, $40
aluminum/silver-brite. Scorpion spray on truck bed liner
finish available, $100 additional. "D" rings or shackle
mounts are standard. License plate recess with lights is
standard.
<-----
^ Lower tube to protect radiator
core support and mounting
point for skid plate.
core support and mounting
point for skid plate.