Products for the Nissan Xterra 2005 to 2010
The low profile Wincher bumper provides greatly
increased approach angle and room in the wheel
wells as well increased strength and good looks.
The bumper is formed out of 3/16" steel with 1/4"
mounts. It has the capability to mount a winch, a
receiver hitch, or just function as a heavy duty
replacement bumper. And check out those massive
tow points! A full 7/8" thick. No wimpy 1/2" thick or
less ones here that will tear off or tear through the
first time you use them.
The factory skid plate will reattach to the Wincher or
you can order our replacement skid plate in
aluminum or stainless steel.
Optional recessed light kits replace the next to
useless factory fog lights. The lights can be wired into
the factory harness (if present) or order a switch kit
to turn them on when you want to.
Fully configurable and built to order, the Wincher can
be ordered with or without whatever options you want.
increased approach angle and room in the wheel
wells as well increased strength and good looks.
The bumper is formed out of 3/16" steel with 1/4"
mounts. It has the capability to mount a winch, a
receiver hitch, or just function as a heavy duty
replacement bumper. And check out those massive
tow points! A full 7/8" thick. No wimpy 1/2" thick or
less ones here that will tear off or tear through the
first time you use them.
The factory skid plate will reattach to the Wincher or
you can order our replacement skid plate in
aluminum or stainless steel.
Optional recessed light kits replace the next to
useless factory fog lights. The lights can be wired into
the factory harness (if present) or order a switch kit
to turn them on when you want to.
Fully configurable and built to order, the Wincher can
be ordered with or without whatever options you want.
Pricing:
Base model wincher, winch mount or receiver style $560
Bumper only $540
Options:
Grill Guard $85
Light Guards - $85
D rings or shackle mounts $40 pair
Remount factory fog lights in bumper $75
Recessed 55 watt 5" offroad lights, $115 pair
Recessed 100 watt 5" lights, $150 pair
HD Switch kit (for lights) - $19.75
Receiver tube (in addition to winch box) $60
Turn Signal/marker light set $45
LED turn signals $115
Light bar - $45
Rubber dock bumper - $40
Aluminum skid plate - $150
Stainless Steel skid plate - $175
Finishes
Standard finish is satin black
Gloss black - $20 additional
Aluminum/Silver-Brite - $40
Spray on Bedliner - $100 in black, grey, red, green, or
yellow
For custom colours, please call.
Base model wincher, winch mount or receiver style $560
Bumper only $540
Options:
Grill Guard $85
Light Guards - $85
D rings or shackle mounts $40 pair
Remount factory fog lights in bumper $75
Recessed 55 watt 5" offroad lights, $115 pair
Recessed 100 watt 5" lights, $150 pair
HD Switch kit (for lights) - $19.75
Receiver tube (in addition to winch box) $60
Turn Signal/marker light set $45
LED turn signals $115
Light bar - $45
Rubber dock bumper - $40
Aluminum skid plate - $150
Stainless Steel skid plate - $175
Finishes
Standard finish is satin black
Gloss black - $20 additional
Aluminum/Silver-Brite - $40
Spray on Bedliner - $100 in black, grey, red, green, or
yellow
For custom colours, please call.
| Wincher |
| MultiCarrier |
Pricing, MultiCarrier, Xterra 2005 - 2008
MultiCarrier bumper only - $400
MultiCarrier System - $600
Options:
Receiver hitch (2" ID) with chain hooks - $65
Jack carrier - $25
CB antenna mount - $10
Gas can carrier - $45
license plate light and mount - $25
Finishes:
Standard finish is satin black.
Gloss Black - $20
Aluminum/Silver-Brite - $45
Scorpion spray on truck bed liner finish available,
$100 additional. Call for custom colours.
MultiCarrier bumper only - $400
MultiCarrier System - $600
Options:
Receiver hitch (2" ID) with chain hooks - $65
Jack carrier - $25
CB antenna mount - $10
Gas can carrier - $45
license plate light and mount - $25
Finishes:
Standard finish is satin black.
Gloss Black - $20
Aluminum/Silver-Brite - $45
Scorpion spray on truck bed liner finish available,
$100 additional. Call for custom colours.
| winch style bumper with plate style grill guard, light guards, and shackle mounts |
| stock skid plate installed to bumper |
| winch mount style with Stinger style grill guard, standard light guards, shackle mounts |
| winch mount style with plate style grill guard, lights guards, shackle mounts |